Zero Homes' logo

Guide

Furnace blower motor replacement cost (and the other big-ticket parts)

Rich Jagisch

Rich Jagisch

Director of Growth

7 minute read

11/17/2026

Illustration of a furnace blower motor on a workbench beside a repair quote totaling $1,800.

Replacing a furnace blower motor costs $500 to $2,300, parts and labor included [1]. The price depends mostly on the kind of motor. A standard single-speed motor is at the low end. A variable-speed motor is at the high end.

It's one of four furnace repairs that regularly run into four figures. The others are the control board, the draft motor and the heat exchanger.

Here is what each one costs, why the estimates vary, and how old a furnace can be before the repair stops being worth it.

Key takeaways

  • A blower motor replacement runs $500 to $2,300. Standard motors cost $500 to $1,400 and variable-speed motors $800 to $2,300.

  • The job takes 2 to 3 hours, with labor at $75 to $150 an hour.

  • If the furnace is under warranty, the motor may be free. The labor usually isn't.

  • Control boards cost $200 to $650, draft motors $200 to $1,500 and gas valves $200 to $800.

  • On a furnace over 12 to 15 years old, a four-figure part is a reason to price a replacement first.

How much does it cost to replace a furnace blower motor?

The blower motor is the fan that pushes warm air through your ducts. When it fails, the furnace still makes heat, but nothing moves it.

Illustration of two furnace blower motors with price tags: a standard motor at $500 to $1,400 and a variable-speed motor at $800 to $2,300.

HomeGuide breaks the cost down by motor type [1].

Motor typeWhat it isInstalled cost
Standard motor, labeled PSCRuns at one speed, or a few fixed speeds$500 to $1,400
Variable-speed motor, labeled ECMAdjusts its speed continuously$800 to $2,300
Blower wheel onlyThe fan itself, not the motor$100 to $400

You'll see the letters PSC or ECM on a quote. They name the two motor designs. The second is more efficient and costs more to replace.

Labor is a large share of the bill. Technicians charge $75 to $150 an hour, and the job takes 2 to 3 hours on average [1]. A service call fee of $75 to $200 may come on top, though some companies apply it to the repair [1].

Why do some guides quote less? HomeGuide's general repair page lists blower motors at $300 to $900 [2]. Its page devoted to the part starts at $500 [1]. The lower figure reflects the simplest motors in the easiest furnaces. If your furnace has a variable-speed motor, plan on the higher range.

Is the blower motor covered by warranty?

Possibly, in part. If the furnace is still under the manufacturer's warranty, the manufacturer covers the motor itself. Most warranties don't cover the labor to install it [1].

So check the furnace's age and registration before you approve the work. Carrier's parts warranty, for example, runs 5 years, or 10 if the furnace was registered within 90 days [3]. A motor that fails in year 8 may be free on a registered furnace and full price on an unregistered one.

Don't replace it yourself to save on labor. HomeGuide notes that doing so can void the warranty [1]. More on the fine print is in HVAC warranty: what's actually covered.

What do the other expensive furnace parts cost?

These figures are national ranges from HomeGuide and Angi, with labor included [2] [4]. The last column is our own judgment.

Chart of typical cost ranges for five furnace parts: control board, gas valve, draft motor, blower motor and heat exchanger.
PartWhat it doesTypical costWorth it if the furnace is
Control boardThe furnace's computer. It runs the startup sequence.$200 to $650Under 12 years
Draft motor, also called the inducer motorA small fan that clears exhaust before the burners light$200 to $1,500Under 12 years
Gas valveOpens and closes the gas supply to the burners$200 to $800Under 12 years
Blower motorMoves heated air through the ducts$500 to $2,300Under 12 years
Heat exchangerKeeps exhaust apart from household air$1,000 to $3,000Only if the part is still under warranty

The heat exchanger is a special case because it's a safety issue as well as a cost. We give it its own guide: cracked heat exchanger: repair or replace?

When is a blower motor not worth replacing?

When the rest of the furnace is the same age as the motor that just failed.

A blower motor lasts 10 to 20 years, depending on how much it runs [1]. A gas furnace typically lasts 15 to 20 [5]. Those two ranges overlap heavily. A motor that fails at year 16 has not failed early. It has reached the end of a normal life, and so has everything around it.

That's the reasoning behind the age column. Under 12 years, a new motor buys you many more winters. Past 15, you're putting a $1,500 part into a furnace that may need a control board next year and a draft motor the year after.

There are two published rules of thumb for this. One multiplies the furnace's age by the repair cost and suggests considering replacement above $5,000 [6]. By that rule, a $1,500 motor crosses the line on any furnace older than three years, which shows how blunt it is. Angi suggests thinking about replacement once repairs approach 30 percent of the price of a new furnace [7].

Our sales team's test is simpler. If the furnace is over 15 years old and you don't want to pay the repair quote, it's probably time to replace it. The full reasoning is in should I repair or replace my furnace?

What can make the repair worth it anyway?

Several things, and it's fair to name them.

The furnace is young. At 6 or 8 years old, replace the motor. A single failed part doesn't condemn a furnace.

The part is under warranty. If you're paying labor only, the math changes completely.

It's only the capacitor. A blower that hums but won't spin may have a failed capacitor, a small part that helps the motor start. That repair costs $100 to $250 [2] [4]. Ask whether it was tested before the motor was condemned.

You need time. A repair can be a reasonable way to buy a season while you plan a replacement properly. Just count it as that.

How to read the quote

Ask for three things in writing before you agree.

  1. The type of motor being installed, and the part number.

  2. Parts and labor as separate figures.

  3. Whether the part is covered by the manufacturer's warranty.

If the number still looks high, compare it with the ranges above. For the full list of what furnace repairs cost, see furnace repair cost: what's normal, and what's a signal.

One disclosure. Zero Homes doesn't repair furnaces we didn't install, so we have no motor to sell you. We replace aging systems and service the ones we put in.

Frequently asked questions

Sources

  1. HomeGuide, "How much does blower motor replacement cost?" https://homeguide.com/costs/blower-motor-replacement-cost

  2. HomeGuide, "Furnace repair cost." https://homeguide.com/costs/furnace-repair-service-cost

  3. Carrier, "Carrier warranty registration and information." https://www.carrier.com/us/en/residential/homeowner-resources/warranty/

  4. Angi, "How much does the average furnace repair cost?" by Paige Bennett, updated August 23, 2024. https://www.angi.com/articles/how-much-does-common-furnace-repair-cost.htm

  5. Lennox, "How long does a furnace last?" https://www.lennox.com/residential/lennox-life/consumer/how-long-does-a-furnace-last

  6. CBS News, "What is the $5,000 rule for HVAC systems?" by Angelica Leicht, June 24, 2026. https://www.cbsnews.com/news/what-is-5000-rule-hvac-systems/

  7. Angi, "How to know if you should repair or replace your furnace." https://www.angi.com/articles/when-should-i-replace-my-furnace.htm


If the quote for a motor or a board is one you don't want to pay on a furnace that age, see what replacing the system would involve. [See what furnace replacement looks like with Zero Homes](/services/furnace-replacement).